This Service Manual (Revision January 2007) is part of the multinational documentation system for Xerox WorkCentre 7132. The Service Documentation is used in order to diagnose machine malfunctions, adjust components and has information which is used to maintain the product in superior operating condition. It is the controlling publication for a service call. Information on its use is found in the Introduction of the Service Documentation. This manual contains information that applies to NASG (XC) and ESG (XE) copiers.
The Service Call Procedures in Section 1 describe the sequence of activities used during the service call. The call must be entered using these procedures.
All wirenets are shown on the Circuit Diagrams (CDs). Power distribution wirenets are shown in Section 7 (Wiring Data) of the Service Manual. The power distribution wirenets on the CDs will end at the terminal board for the power being distributed. Find the wirenet for that power and locate the terminal board on the wirenet. Use the wirenet to troubleshoot any power distribution wiring not shown on the CD.
Block Schematic Diagrams (BSDs) are included in Section 7 (Wiring Data) of the Service Manual. The BSDs show the functional relationship of the electrical circuitry to any mechanical, or non-mechanical, inputs or outputs throughout the machine. Inputs and outputs such as motor drive, mechanical linkages, operator actions, and air flow are shown. The BSDs will provide an overall view of how the entire subsystem works. It should be noted that the BSDs no longer contain an Input Power Block referring to Chain 1. It will be necessary to refer to the Wirenets in order to trace a wire back to its source
Download Service Manual
The Service Call Procedures in Section 1 describe the sequence of activities used during the service call. The call must be entered using these procedures.
All wirenets are shown on the Circuit Diagrams (CDs). Power distribution wirenets are shown in Section 7 (Wiring Data) of the Service Manual. The power distribution wirenets on the CDs will end at the terminal board for the power being distributed. Find the wirenet for that power and locate the terminal board on the wirenet. Use the wirenet to troubleshoot any power distribution wiring not shown on the CD.
Block Schematic Diagrams (BSDs) are included in Section 7 (Wiring Data) of the Service Manual. The BSDs show the functional relationship of the electrical circuitry to any mechanical, or non-mechanical, inputs or outputs throughout the machine. Inputs and outputs such as motor drive, mechanical linkages, operator actions, and air flow are shown. The BSDs will provide an overall view of how the entire subsystem works. It should be noted that the BSDs no longer contain an Input Power Block referring to Chain 1. It will be necessary to refer to the Wirenets in order to trace a wire back to its source
Download Service Manual
Loading...
WorkCentre® 5135 / 5150
See how easy and secure printing is with Workcentre 5135 and 5150 black and white multifunction copier detailed specifications.
Product downloads for WorkCentre 5135/5150. The free Xerox Global Print Driver manages Xerox and non-Xerox printers on your network with a single, easy-to-use interface. View and Download Xerox WORKCENTRE 5135 specification online. Black-and-White Multifunction Printer. WORKCENTRE 5135 printer pdf manual download. Also for: Workcentre 5150.
Black-and-White Multifunction Printer
WorkCentre 5135 | WorkCentre 5150 | |
shown with Offset Catch Tray | shown with Office Finisher | |
WorkCentre 5135 | WorkCentre 5150 | |
Output Speed | ||
Printing and Copying | Up to 35 ipm (images per minute) | Up to 50 ipm (images per minute) |
8.5 x 11 in. (A4/210 x 297 mm) | 8.5 x 11 in. (A4/210 x 297 mm) | |
Up to 25 ipm 8.5 x 14 in. (216 x 356 mm) | Up to 36 ipm 8.5 x 14 in. (216 x 356 mm) | |
Up to 22 ipm 11 x 17 in. (A3/297 x 420 mm) | Up to 31 ipm 11 x 17 in. (A3/297 x 420 mm) | |
First-copy-out Time (FCOT) – letter size, from platen to offset catch tray | ||
As fast as 4.6 seconds | As fast as 3.4 seconds | |
Copy Specifications | ||
Copying | ||
Document Scanner | Duplex Automatic Document Handler (DADH). Scans sizes up to 11 x 17 in. (A3/297 x 420 mm) SEF | |
Sides (input:output) | 1:1, 1:2, 2:2 and 2:1 | |
Quantity | 1 to 9,999 | |
Resolution | 600 x 600 x 8 bit dpi input / 4800 x 600 dpi interpolated output | |
Concurrency1 | Unlimited program-ahead consistent with configuration (Copy, Print, Fax and Scan) | |
Copy Pre-Collation | 128 MB – Copier (expandable to 512 MB) | |
Memory (EPC) | 384 MB – Copier/Printer (expandable to 512 MB) | |
Basic Copy | Features | Options |
Features/Options | Collation | Hole Punching |
Automatic 2-Sided/Duplex | Stapling | |
Auto Reduction and Enlargement to fit selected paper size | Booklet Creation | |
Auto Paper Select | ||
Auto Tray Switching |
1 A minimum of 256 MB EPC memory required | Detailed Specifications 1 |
WorkCentre® 5135 / 5150
Imaging Copy Features | Image Quality |
• Original Type Selections: Normal, Text, Halftone, Photo | |
• Output Quality Selections: Lighter/Darker, Background Suppression, Contrast, Sharpness or Screening | |
Book Copying/Bound Copying | |
Edge Erase (with Print to Edge option) | |
Mixed Size Original | |
Image Shift (with Auto Center option) | |
Output Copy Features | ID Card Copy |
Booklet Creation | |
Inserts and Tab copying | |
Covers (Front only, Front and Back, Back only: Blank or Printed) | |
Build Job (Enables page-level programming to include tab copying and also lets you proof each section or delete | |
last section as the job is built) | |
Annotation and Bates Stamping | |
Multi-up (up to six columns by six rows) | |
Invert Image (negative or mirror image) | |
Sample Set and Job Storage (Store and Recall job programming) | |
Transparencies (including dividers – blank or printed) | |
Heavy weight paper (not rough stock) | |
Other Copy/Device | Job Interrupt (Interrupt the current job) |
Features | Help (Intuitive text and graphic descriptions) |
Internal Auditron (Copy) | |
Languages (Select up to 21 languages for User Interface – US English, International English, International | |
French, Italian, German, International Spanish, Catalan, Dutch, Portuguese, Brazilian [Latin Portuguese], Swedish, | |
Norwegian, Danish, Finnish, Turkish, Greek, Russian, Czech, Polish, Hungarian and Romanian)2 | |
Reduction/Enlargement | Variable Zoom from 25% - 400% in 1% increments |
Six User-Programmable percentages (25%, 64%, 78%, 129%, 154% and 200%) | |
Foreign Device Interface | Interface to third-party access control devices, coin machines, card readers |
(FDI) (Optional) | Supports a variety of vending stations available through the Xerox Custom Application Service |
USB Port | PC interface for upload/download of internal auditron data and Xerox Copier Assistant |
Customer device administration/software upgrade | |
Accessibility Option | Xerox Copier Assistant® (XCA) Software (not available in all countries) provides a PC-based alternative to the user |
interface touchscreen. | |
Used in conjunction with a customer-supplied PC attached via the USB port, this software provides | |
text-to-speech, screen magnification and easy PC keyboard access to basic and advanced copy features. | |
Paper Handling – Duplex Automatic Document Feeder (DADF) | |
Capacity3 | 75 sheets |
Speed | Up to 60 ipm (images per minute) simplex / up to 28 ipm duplex, 8.5 x 11 in. (A4/210 x 297 mm) long edge feed |
(LEF) | |
Paper Sizes Sensed | Statement – 5.5 x 8.5 in. (A5/148 x 210 mm long edge feed (LEF) or short edge feed (SEF) |
Letter – 8.5 x 11 in. (A4/210 x 297 mm) LEF or SEF | |
Legal – 8.5 x 14 in. (216 x 356 mm) SEF | |
Ledger – 11 x 17 in. (A3/297 x 420 mm) SEF | |
Weights | 13 lb to 32 lb bond (50 to 120 gsm) |
2 | Language selection and number varies by location. | |
3 | Paper capacities are based on 20 lb/75 gsm stock; capacities will vary with different weight stocks. | Detailed Specifications 2 |
WorkCentre® 5135 / 5150
Paper Handling – Two Front Loading Paper Trays
Capacity3 | 500 sheets each |
Sizes | User adjustable from 5.5 x 8.5 in. (A5/148 x 210 mm) to 11 x 17 in. (A3/297 x 420 mm) |
Weights | 16 lb to 53 lb bond/110 lb index (60 to 200 gsm) |
Types | Letterhead |
Preprinted forms | |
Plain Paper | |
Drilled/Hole-punched | |
Heavyweight | |
Recycled | |
Tab Stock | |
Bond | |
Envelopes | |
Custom Settings (up to 7) | |
Options | Envelope Tray Kit for Tray 2 (Capacity 50 envelopes) |
Paper Handling – Bypass Tray | |
Capacity3 | 100 sheets |
Sizes | User Adjustable from 4.13 x 5.83 in. (105 x 148 mm) to 11 x 17 in. (A3/297 x 420 mm) |
Weights | 16 lb to 57 lb bond/80 lb cover (60 to 216 gsm) |
Types | Letterhead |
Preprinted forms | |
Plain Paper | |
Drilled/Hole-punched | |
Heavyweight | |
Recycled | |
Label Stock | |
Transparencies | |
Tab Stock | |
Bond | |
Envelopes | |
Custom Settings (up to 7) | |
Paper Handling – High Capacity Tandem Tray | |
Capacity3 | Two trays: 1,600 and 2,000 sheets |
Sizes | 8.5 x 11 in. (A4/210 x 297 mm) LEF |
Weights | 16 lb to 53 lb bond/110 lb index (60 to 200 gsm) |
Paper Handling – Total Capacity | |
Device Total Capacity3 | 4,700 sheets (with Bypass tray, front loading paper trays and High Capacity Tandem Tray) |
Output Option – Offset Catch Tray (OCT) option | |
Capacity3 | 300 sheets |
Sizes | 4.25 x 5.5 in. (A6/105 x 148 mm) to 11 x 17 in. (A3/297 x 420 mm) |
Weights | 16 lb to 57 lb bond/80 lb cover (60 to 216 gsm) |
3 Paper capacities are based on 20 lb/75 gsm stock; capacities will vary with different weight stocks. | Detailed Specifications 3 |
WorkCentre® 5135 / 5150
Output Option – Office Finisher Option
Capacity3 | Top Tray – 250 sheets |
Stacking Tray – 2,000 sheets | |
Sizes | 4.25 x 5.5 in. (A6/105 x 148 mm) to 11 x 17 in. (A3/297 x 420 mm) |
Weights | 16 lb to 57 lb bond/80 lb cover (60 to 216 gsm) |
Stapling3 | 50 sheets |
Single (any corner) and dual | |
Hole Punch (Optional) | 3-hole punch |
2-hole Legal punch | |
Output Option – Convenience Stapler Option | |
Capacity3 | 50 sheets |
Sizes | 7.5 x 5.4 in. (190 x 138 mm) to 10.9 x 10.24 in. (277 x 260 mm) |
Print Specifications |
Network Printing – Controller (Simultaneous rip, receive, program ahead, queue processing and transmit)
Xerox Workcentre 5135 Service Manual Form
Processor | 1.4 GHz AMD Athlon dedicated |
Memory (ESS) | 256 MB |
System Disk | 80 GB Hard Drive shared |
Printer Language (PDL) | • PCL 6/PCL 5e |
auto switching | • PostScript 3 emulation |
• TIFF (6.0 Old JPEG and New JPEG) | |
• TIFF Fax Extended (TIFF-FX) | |
• PDF | |
• LCDS, SCS, XES and IPDS through third party transforms |
Network Printing – Resolution (printing via CentreWare software)
PostScript emulation: 600 x 600 dpi and 1200 x 1200 dpi (up to 256 shades of grey) | |
PCL: 600 x 600 dpi | |
Supports PCL and PS switching within job | |
Advanced Features Include | Bi-directional Print Drivers |
Embedded web server for remote control/monitor/setup | |
Job monitoring at the device and at desktop | |
Network Printing – Printing Features | |
Paper Output | Special font |
Banner Sheet | |
Rotate Image | |
Offset |
3 Paper capacities are based on 20 lb/75 gsm stock; capacities will vary with different weight stocks. | Detailed Specifications 4 |
WorkCentre® 5135 / 5150
Network Printing – Print Driver Options
Xerox Workcentre 5945 Manual
Job Type | ||
• Secure, Sample, Delay | ||
• LAN Fax-with fax option | ||
• Save and Save & Print | ||
Paper Selection by attribute (including transparency separators) | ||
Duplex (2-sided) | ||
Finishing | ||
• Multiple Stapling positions | ||
• Hole punch (if configured) | ||
• Booklet creation | ||
• Fit to new paper size | ||
Output tray selections | ||
Store and recall driver setting | ||
Special Pages | Exception Page programming (covers, inserts/tabs, exception pages) | |
Image Options | Light/Dark | |
Toner saver | ||
Resolution options (600 x 600 and 1200 x 1200 dpi) | ||
Reduction/Enlargement | ||
Margins (edge to edge printing) | ||
Invert Image (negative/mirror) | ||
Layout/Watermark | N-up (16)/Multi-up | |
Booklet Layout/Finishing | ||
Fit to new paper size | ||
Image orientation | ||
Watermark options | ||
Printing Protocols and Networks | ||
Physical | Ethernet 10/100BaseT, 10BaseT, Token ring (IEEE802.5) – via adapter, Wireless Ethernet | |
(IEEE802.11a/b/g) – via third party adapter | ||
USB 2.0 | ||
Operating Systems | • Microsoft Windows XP, Windows Server XP, Windows Server 2003, Windows Server 2008, Vista | |
• Citrix | ||
• Novell NetWare 4.x, 5.x, 6 | ||
• Mac OS 8.x, 9.x, OS 10.3 | ||
• Solaris 2.8, 2.9, 2.10 | ||
• HPUX 11.0 | ||
• IBM AIX 4.3.3 | ||
• Linux Fedora Core 1 (Intel) | ||
• Linux Yellow Dog 3.0 | ||
Network Protocols | • TCP/IPv4/IPv6, LPR/LPD, Raw IP (Port 9100), NetBIOS SMB, IPX/SPX and Net BEUI, IPP | |
• AppleTalk/EtherTalk | ||
Administration Protocols | DHCP, BOOTP, SNMP, WINS, Bonjour, DDNS, SLP v2, SSDP, HTTP/S, RARP, LDAP, SMTP, POP3 | |
Security Protocols/Features | Protocols | Features |
• HTTPS | • IP filtering | |
• IPsec | • Unlimited Secure Print | |
• 802.1x | • Audit log | |
• SNMPv3 | • Image Overwrite | |
• Data Encryption | ||
Fonts | PCL: 80 scalable fonts, line printer and bitmap format line printer fonts (true type fonts) | |
PostScript 3: 136 PostScript standard fonts (true type fonts/send fonts as/substitution table) | ||
Font Management Utility for downloading additional fonts (available for Windows and Mac) |